Replacing Seat Sling Upholstery; Installing The Plastic Footplate - Invacare Eliminator? Owner's Operator And Maintenance Manual

Table of Contents

Advertisement

PROCEDURE 3
Foam Insert
U
P
H
O
L
S
T
E
R
Y
Fastening
Flaps
FIGURE 2 - ADJUSTING/REPLACING LEG
CUSHION WITH FOOT POUCH
Replacing
1. Unlatch the three (3) fastening flaps that secure the
leg cushion to the racing chair frame.
2. Unlatch the foot pouch from the back upholstery.
F
3. Remove the existing leg cushion w/foot pouch.
O
4. Install the new leg cushion w/foot pouch.
O
5. Feed the top two (2) fastening flaps of the new leg
T
cushion w/foot pouch through the slots on the racing
R
chair frame.
E
6. Feed the bottom fastening flap between the side guard
and the racing chair frame and secure together.
S
7. Attach the foot pouch to the back upholstery and ad-
T
just to the desired tautness. Refer to ADJUSTING LEG
CUSHION WITH FOOT POUCH in this procedure
of the manual.
REPLACING SEAT SLING
UPHOLSTERY (FIGURE 3)
1. Unlatch the foot pouch from the back upholstery.
2. Unlatch the bottom of the back upholstery from the
underside of the seat sling upholstery.
3. Unlatch the top two (2) fastening flaps that secure the
leg cushion to the racing chair frame.
Seat Sling
Upholstery
Back
Upholstery
Foot Pouch
Slots
UPHOLSTERY/FOOTREST
4. Remove seat cushion from the seat sling upholstery.
5. Unlatch the fastening flap that secures the existing
seat upholstery to itself.
6. Slide the ends of the existing seat upholstery up and
through the frame of the racing chair.
7. Slide the new upholstery through the frame of the rac-
ing chair as shown in FIGURE 5.
8. Pull the seat upholstery to the desired tautness and
secure with the fastening flap.
9. Reverse STEPS 1-5 to reassemble.
Racing
Chair
Frame
Fastening
Flap
FIGURE 3 - REPLACING SEAT SLING
UPHOLSTERY
INSTALLING THE PLASTIC
FOOTPLATE (FIGURE 4)
WARNING
Feet MUST be secured against the plastic
footplate BEFORE using racing chair. Oth-
erwise, injury or damage may occur.
1. Secure the fastening straps around the frame as
shown in FIGURE 4.
2. Place feet onto plastic footplate where indicated in
FIGURE 4.
NOTE: It may be necessary to loosen or tighten the fas-
tening straps for comfort and to secure feet to the footplate.
3. Secure ankles with ankle strap by wrapping strap
around ankles.
12
Seat
Upholstery

Advertisement

Table of Contents
loading

Table of Contents