Graco PRO Xs Specification page 11

ACCESSORIES
TIP SELECTIOn CHArT
For PRO Xs4 AA and PRO Auto Xs AA Spray Guns
Fan Width at
Orifice Size 10 in (260 mm)
in (mm) in (mm)
0.007 (0.178) 2-4 (50-100)
4-6 (100-150)
6-8 (150-200)
0.009 (0.229) 2-4 (50-100)
4-6 (100-150)
6-8 (150-200)
8-10 (200-250)
0.011 (0.279) 2-4 (50-100)
4-6 (100-150)
6-8 (150-200)
8-10 (200-250)
10-12 (250-300)
12-14 (300-350)
14-16 (350-400)
0.013 (0.330) 2-4 (50-100)
4-6 (100-150)
6-8 (150-200)
8-10 (200-250)
10-12 (250-300)
12-14 (300-350)
14-16 (350-400)
16-18 (400-450)
0.015 (0.381) 4-6 (100-150)
6-8 (150-200)
8-10 (200-250)
10-12 (250-300)
12-14 (300-350)
14-16 (350-400)
16-18 (400-450)
0.017 (0.432) 4-6 (100-150)
6-8 (150-200)
8-10 (200-250)
10-12 (250-300)
12-14 (300-350)
16-18 (400-450)
0.019 (0.483) 6-8 (150-200)
8-10 (200-250)
10-12 (250-300)
12-14 (300-350)
14-16 (350-400)
0.021 (0.533) 8-10 (200-250)
10-12 (250-300)
12-14 (300-350)
14-16 (350-400)
0.023 (0.584) 8-10 (200-250)
10-12 (250-300)
12-14 (300-350)
0.025 (0.635) 8-10 (200-250)
AIr-ASSISTED PrO XS GUnS
245282
Part No.
245298
GG3107
GG3207
AA Round Spray Tip
GG3307
GG3109
Part No.
GG3209
236836
GG3309
236837
GG3409
236838
236839
GG3111
236840
GG3211
236841
GG3311
236842
GG3411
244917
GG3511
GG3611
115898
GG3711
238563
GG3113
244834
GG3213
Air Whip Hose
GG3313
Grounded air hose for extra flexibility.
GG3413
GG3513
GG3613
Fluid Whip Hose
GG3713
Maximum working pressure: 3000 psi (207 bar, 20.7 MPa)
ID: 1/8 in. (3.2 mm). Thread size: 1/4 npsm(f) x 1/4 npt(m).
GG3813
GG3215
GG3315
Fluid Hose
GG3415
GG3515
GG3615 244913
GG3715
GG3815
245271
GG3217
GG3317
GG3417
198405
GG3517
GG3617
GG3817
GG3319
GG3419
GG3519
GG3619
GG3719
GG3421
GG3521
GG3621
GG3721
GG3423
GG3523
GG3623
GG3425
PRO Xs4 AA Round Spray Kit (manual guns)
Round spray provides a higher level of performance
to electrostatic spraying. Includes tip of choice.
PRO Auto Xs AA Round Spray Kit
Round spray provides a higher level of performance
to electrostatic spraying. Includes tip of choice.
Pattern
Width
9 in
10 in
10 in
14 in
13 in
12 in
11 in
Electrode Replacement Kit
Includes 5 electrodes.
Fluid Swivel
In-Line Fluid Filter, 60 mesh (3 pack)
To replace the 100 mesh filter that is included with the gun.
Integral Air Swivel with Left Handed Threads
236130 3 ft (0.9 m)
236131 6 ft (1.8 m)
236134 Length: 3 ft (0.9 m)
236135 Length: 6 ft (1.8 m)
240793 1/4 in. ID x 25 ft (7.6 m)
240794 1/4 in. ID x 50 ft (15.2 m)
E/S Always on Kit
Replaces inlet fitting with ball valve to shut air off during flushing.
Converts ES on/off lever to always ON condition.
Gun Washer Kit
Used to convert Graco gun washers to clean PRO Xs
air-assisted guns.
Gun Flush Box
Used to convert existing gun flush boxes to hold PRO Xs3
and Xs4 models guns
APPrOvALS
Pro Xs2, Pro Xs3 and Pro Xs4 guns*
Approved for use in Class I, Division I locations spraying
Group D Materials.
Approved for use in Group II, Category 2 locations spraying
Group IIA materials.
*Pro Xs3 waterborne guns 244581, 244582 and 244592 for
isolation systems are not approved for hazardous locations.
Flow Rate
at 600 psi (41 bar, 4.1 MPa)
4.1 oz/min
5.1 oz/min
5.4 oz/min
7.8 oz/min
9.1 oz/min
11.8 oz/min
16.2 oz/min