Graco PRO Xs Specification page 10

ACCESSORIES
GrOUnDED AIr HOSES (rEQUIrED FOr USE)
Length Air Flex™
6 ft (1.8 m) 244963
15 ft (4.6 m) 244964
25 ft (7.6 m) 244965
36 ft (11 m) 244966
50 ft (15 m) 244967
75 ft (23 m) 244968
100 ft (30.5 m) 244969
Air Flex: EPDM rubber core and cover for extra flexibility.
Standard: Modified semi-conductive polyamide core, urethane cover for
added durability.
*Waterborne (required for isolated waterborne applications): Conductive SST wire
braid for grounding. Polyurethane tube and cover.
24A225 3/8" ID Grounded Air Hose
50 ft (15 m)
24A226 3/8" ID Grounded Air Hose
75 ft (23 m)
245252 Waterborne Fluid Hose
25 ft (7.6 m) fluid hose. For isolation systesm, used only with PRO Xs3
waterborne guns.
215637 Fluid Hose
1/4 in ID x 25 ft (7.6 m)
215638 Fluid Hose
1/4 in ID x 50 ft (15.2 m)
185493 Air Hose Adapter nipple
Allows for the connection of multiple air hoses as needed for the
special grounded PRO Xs air hoses. 1/4 npsm (L.H.) x 1/4 npsm.
112534 Air Quick Disconnect/Swivel
Swiveling air quick disconnect designed to replace the standard air
swivel fitting in the gun handle.
rOUnD PATTErn KITS
Consists of fluid tip, diffuser and air cap.
245217 4-6 in (102-152 mm) diameter
245219 8-10 in (203-254 mm) diameter
277851 6-12 in (152-305 mm) diameter
Low velocity swirling spray pattern that provides excellent
transfer efficiency
AIr SPrAy PrO XS GUnS
Fluid nozzles
Part no. Size
197263 0.75 mm (0.030 in.)
197264 1.0 mm (0.042 in.)
197265 1.2 mm (0.047 in.)
197266 1.5 mm (0.055 in.)
197267 1.8 mm (0.070 in.)
197268 2.0 mm (0.080 in.)
Standard Waterborne*
223068 235068
223069 235069
223070 235070
223071 235071
223072 235072
223073 235073
223074 235074
AIr SPrAy PrO XS GUnS (COn'T)
Glass Reinforced Fluid nozzles
Part no. Size
249920 0.75 mm (0.030 in.)
249921 1.0 mm (0.042 in.)
249922 1.2 mm (0.047 in.)
249923 1.5 mm (0.055 in.)
249924 1.8 mm (0.070 in.)
249925 2.0 mm (0.080 in.)
276697 SnapBack Electrode Replacement needle
277007 Abrasive Material Electrode Replacement needle
24A328 External Charging Probe for PRO Xs Waterborne gun
Replacement quick-release probe.
MISCELLAnEOUS
244912 Push/Pull Valve
For quick change of fan size.
24A337 Aluminum Inlet Bracket
Reduces gun weight by 1.3 oz (39 g).
24A335 Composite Trigger Kit
Allows the conversion of PRO Xs guns to a light weight trigger.
244916 Four Finger Trigger Kit
Allows the conversion of PRO Xs3 and PRO Xs4 guns to be used with
a four-finger trigger.
244919 High Conductivity Kit
Allows standard coating PRO Xs3 guns to effectively spray high
conductivity coatings.
245277 kV Test Kit
Test fixture, high voltage test probe and kV meter.
236003 kV Test Kit
High voltage probe and kV meter.
241079 Megohm Meter
500 volt output, 0.01-2000 megohms.
244731 1 Quart (0.95 l) Remote Pressure Cup
Includes air regulators for both gun atomization and supply air to the
pressure cup.
198405 Gun Flush Box
Used to convert existing gun flush boxes to hold PRO Xs3 and Xs4
models guns
245270 Gun Washer Kit
Used to convert Graco gun washers so they can clean PRO Xs
air spray guns.
244914 Gun Covers (box of 10)
For PRO Xs2 gun.
244915 Gun Covers (set of 10)
For PRO Xs3, PRO Xs4 and PRO Xs4 AA guns.
239945 Gun Covers (box of 10)
For PRO Auto Xs guns.
223688 Turbine Alternator Bearing Repair Kit
105749 Cleaning Brush
Select Comfort Grips
Snap-on grips to increase the handle size to reduce operator fatigue.
245263 Medium Grip Kit
245264 Large Grip Kit