Table of Contents
Advertisement
Product Overview
Top Coat Pump (Kit 24B140)
ti13653a
The pump on the HTX 2030 Sprayer can also be
switched out with a Top Coat Kit 24B140 (purchased
separately). This pump is used for less viscous
materials such as:
•
Oil-based coatings
•
Enamels
•
Latex
•
Block fillers
•
Elastomerics
•
Epoxies
•
Drywall mud
•
Other high-build materials
For instructions on installing the Top Coat Pump, see
manual 313889.
6
When Top Coat Pump is Installed
•
Pump will only run when on/off switch is in ON posi-
tion and pump control is rotated clockwise away
from OFF position
•
Pump control setting adjusts sprayer pressure
a. Rotating knob fully clockwise allows sprayer to
reach maximum working pressure of 3300 psi
(228 bar, 22.8 MPa)
b. Settings below maximum will lower system
pressure
•
Pump will run whenever system pressure is below
the setting of the pump control
•
Sprayer will not respond to Prime switch or Applica-
tor switch when Top Coat pump is installed
ti13653a
313888B
Advertisement
Table of Contents
