Cleanup - Graco HTX 313888B Operation Manual

Cleanup

1. Turn on/off switch OFF.
ti10796b
2. Perform Pressure Relief procedure, page 9.
3. Place pump in pail of clean water.
4. Shut OFF air if spraying with air. Remove applicator
from material and air hoses.
313888B
ti13644a
ti14284a
5. Base Coat Pump: Disconnect material hose from
pump outlet.
ti13639a
6. Insert wet cleaning ball into hose (Base Coat Only).
Connect material hose to pump outlet.
ti13643a
7. Hold material hose over waste pail.
8. Turn on/off switch ON and prime switch ON, or
applicator switch on material hose.
Cleanup
ti13638a
ti13640a
ti10795b
15