Explanation Front Panel; Explanation Rear Panel - DREAM MULTIMEDIA Dreambox DM 600 PVR User Manual

U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR
3. E x p l a n a t i o n f r o n t p a n e l
Smartcard Reader
Insert your Dreamcrypt Smartcard with the golden chip facing down and forward into the
Smartcard reader. Dreamcrypt is a registered trademark of Dream-Multimedia.
Standby LED
The Standby LED lights up red if the Dreambox is in standby mode. It lights up green if the
Dreambox is powered on.
Remote Control (RC) Led
The remote control LED lights up every time the Dreambox receives a signal from the remote
control.
Standby on/off
The Standby on/off button toggles between standby mode and powered on mode.
4. E x p l a n a t i o n r e a r p a n e l
Antenna input (DM 600 PVR-C/T)
Connect your antenna cable here.
Antenna output (DM 600 PVR-C/T)
You can optionally connect your TV or VCR here.
LNB input (DM 600 PVR-S)
Connect the coaxial cable from your LNB here.
LNB output (DM 600 PVR-S)
You can connect an analogue/digital receiver here. Remember to shutdown your Dreambox
completely in order for the receiver to work.
Modem port
You can connect your Dreambox to your ISP via the Modem Socket using a phone line.
S-Video out
Connect the S-Video out of your Dreambox to the S-Video in of your desired device, e.g. a
Beamer.
- 5 -
english