Users In The U.s - Canon imageRUNNER ADVANCE C5255 Instruction Manual

Full color laser mfp
Hide thumbs Also See for imageRUNNER ADVANCE C5255:
Table of Contents

Advertisement

Users in the U.S.A.
Preinstallation Requirements for Canon Facsimile Equipment
The fax function is available only if the FAX Board is installed.
A. Location
Supply a suitable table, cabinet, or desk for the machine. See "Specifi cations" in this guide for specifi c dimensions and weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should be used. If the Super G3 2nd Line Fax Board or Super G3 3rd/4th Line Fax Board is
installed, a multi telephone line (touch-tone or rotary) can be used.
2. Order an RJ11-C telephone wall jack (USOC), which should be installed by the telephone company. If the RJ11-C wall jack is not present,
telephone/facsimile operation is not possible.
3. Order a normal business line from your telephone company's business representative. The line should be a regular voice grade line or an
equivalent one. Use one line per unit. If the Super G3 2nd Line Fax Board or Super G3 3rd/4th Line Fax Board is installed, you can use a multi-
line.
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if you communicate overseas
Canon recommends an individual line following industry standards, i.e., 2500 (touch-tone) or 500 (rotary/pulse dial) telephones.
A dedicated extension off a PBX (Private Branch eXchange) unit without "Call Waiting" can be used with your facsimile unit.
Key telephone systems are not recommended because they send nonstandard signals to individual telephones for ringing and
special codes, which may cause a facsimile error.
C. Power Requirements
The machine should be connected to a standard 120 volt AC, three-wire grounded outlet only.
Do not connect this machine to an outlet or power line shared with other appliances that cause "electrical noise." Air conditioners, electric
typewriters, copiers, and machines of this sort generate electrical noise that often interferes with communications equipment and the sending
and receiving of documents.
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear panel of this equipment is
a label that contains, among other information, a product identifi er in the format of US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
The REN (Ringer Equivalence Number) is used to determine the number of devices that may be connected to a telephone line. Excessive RENs
on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should
not exceed fi ve (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local
telephone company. The REN for this product is part of the product identifi er that has the format US:AAAEQ##TXXXX. The digits represented by
## are the REN without a decimal point (e.g., 10 is a REN of 1.0).
An FCC compliant telephone line cable and modular plug is provided with this equipment. This equipment is designed to be connected to the
telephone network or premise wiring using a compatible modular jack that is Part 68 compliant.
This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariff s.
In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected by the procedures described in the e-Manual, disconnect the equipment from the
telephone line cable and disconnect the power cord. The telephone line cable should not be reconnected or the main power switch turned
ON until the problem is completely resolved. Users should contact their local authorized Canon Facsimile Service Dealer for the servicing of
equipment.
If your equipment malfunctions, please contact your local authorized Canon dealer from whom you purchased the equipment (if under
warranty), or with whom you have a servicing contract. If you are not sure who to contact, and have both purchased and are using the
equipment in the U.S.A., please refer to the "SUPPORT" page on Canon U.S.A.'s Web site (http://www.usa.canon.com).
12
Before using this machine: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents