TROUBLESHOOTING TIPS
Problem
The low battery indicator
blinks or appears
continuously.
Nothing is displayed.
The displayed values are
incorrect.
The display is unusual or the buttons do not operate
normally.
NOTE:
If a malfunction has occurred and you need to repair your unit, all settings and measurement
results are deleted. We recommend that you record measurement results.
Probable Cause
The battery is low or
worn.
Battery saving mode
active.
The polarities of the
battery (+ and -) are
aligned in the wrong
directions.
The battery is worn.
The unit is positioned
incorrectly.
Irregular movement.
Inconsistent pace.
Up and down movement.
The set values are wrong.
Device error.
How to Correct
Replace the battery with a new one (CR2032), refer to
"BATTERY REPLACEMENT".
Press either of
,
saving mode" in "READING THE CURRENT
DISPLAY".
Insert the battery in correct alignement, refer to
"BATTERY REPLACEMENT".
Replace the battery with a new one (CR2032), refer to
"BATTERY REPLACEMENT".
Refer to "The unit may not count steps correctly in the
following conditions:" in "USING THE UNIT".
Check the settings, refer to "SETTINGS".
Replace the battery with a new one (CR2032), refer to
"BATTERY REPLACEMENT".
Reinstall the battery, refer to "BATTERY
REPLACEMENT".
16
or
, refer to "The battery