Table of Contents
Advertisement
Problem
The low battery
indicator blinks or
appears continuously
Nothing is displayed.
The displayed values
are incorrect.
The display is unusual or the buttons do
not operate normally.
NOTE: If a malfuncion has occurred and you need to repair your unit, all settings
and measurement results are deleted. We recommend that you record
measurement results.
TROUbLESHOOTING TIPS
Probable Cause
The battery is low or
worn.
Battery saving mode
active.
The polarities of the
battery (+ and -) are
aligned in the wrong
directions.
The battery is worn
The unit is positioned
incorrectly.
Irregular movement.
Inconsistent pace. Up
and down movement.
The set values are
wrong.
Device error.
Replace the battery with a new one
(CR2032), refer to "BATTERY
REPLACEMENT".
Press either of
refer to "About the battery saving
mode (sleep mode)" in "READING
THE CURRENT DISPLAY".
Insert the battery in correct
alignement, refer to
"BATTERY REPLACEMENT".
Replace the battery with a
new one (CR2032), refer to
"BATTERY REPLACEMENT".
Refer to "The unit may not
count steps correctly in the
following conditions:" in
"USING THE UNIT".
Check the settings, refer to
"SETTINGS".
Replace the battery with a
new one (CR2032), refer to
"BATTERY REPLACEMENT".
Reinstall the battery, refer to
"BATTERY REPLACEMENT".
18
How to Correct
,
or
,
Hide quick links:
Advertisement
Table of Contents
