Travis Industries 564 Owner's Manual page 13

RESETTING THE TEMPERATURE CUTOFF SWITCH
Should the heater overheat, an automatic switch will turn the
heater off and it will not come back on without being reset.
The temperature cutoff switch can be reset by unplugging the
unit, waiting 5 minutes and plugging the unit back in.
CAUTION
If you need to continuously reset the heater, unplug the unit
and call your Travis Industries, Inc. dealer. You can find a
Travis dealer at www.travisproducts.com. Please have your
model and serial number ready when calling.
REMOTE CONTROL
The remote control has a range of approximately 50 ft.
(15.25m), it does not have to be pointed at the fireplace and
can pass through most obstacles (including walls). It is
supplied with 243 independent frequencies to prevent
interference with other units.
BATTERY INSTALLATION
1. Depress tab on the battery cover on the back of the
remote transmitter and remove battery cover.
2. Install 2 AAA batteries into the remote control.
(included)
3. Ensure child lock is in the "unlocked" position.
4. Replace the battery cover.
Batteries
NOTE
When the "BAT" symbol is present on the remote control it is
recommended to replace the batteries promptly, to maintain
full functionality of the remote/fireplace. The remote
transmitter has a battery backup time of only a few hours.
FIGURE 3
13