Travis Industries 564 Owner's Manual page 10

ARCHED FACE INSTALLATION IN FRAMED-IN WALL
NOTE: This does not apply to fireplaces using a Travis pre-built
mantel.
When the 564 E is installed into a framed-in wall with square framing
and drywall a gap will appear between the face and drywall. See the
following page for two methods used to eliminate this gap.
17-1/2"
SIDE VIEW (CROSS SECTION)
When the fireplace is installed into the framing dimensions detaild on page 9 there is a 1/4" gap between
the face and the drywall (or other interior siding).
10
2-3/4"
32-1/4"
29"
Drywall
Framing
Fireplace
26-1/4" (from
base of fireplace)
36"
61"Radius
NOTE: The faceplate installs 1/8" above
the base of the fireplace.
1/4" Gap
Upper
Heat
Shield
(required)
26-3/4" (from
base of fireplace)
27-1/8" (from
Face
base of fireplace)
10