Uniden D1789 series User Manual page 24

audio issues Possible solutions
x Check for interference from appliances (microwave ovens, TVs, etc.) or
There's a lot of
noise or static
x If you use a telecoil hearing aid, turn on T-coil mode (see page 11).
on the line
x If you have any service that uses the phone line, add a DSL or telephone
Caller id problems
Caller ID information does
not display.
Caller ID displays briefly and
then clears.
multistation problems
I can't transfer calls.
Two handsets can't talk to a caller.
A handset says unavailable.
I can't register a new handset.
answering system problems
The answering system does not work.
The system won't record messages.
A handset can't access the answering
system.
My outgoing message is gone.
I can't hear the base speaker.
Messages are incomplete.
The system keeps recording when I
answer on an extension.
bluetooth problems Possible solutions
The D1789 won't
pair with my phone.
24 - English
wireless devices (baby monitors, WiFi equipment, etc.). Move the handset
or base away from the interference source.
line filter (see page 25).
Possible solutions
x Let calls ring twice before answering.
x Make sure your Caller ID service is active.
x You may have to change the line mode. Contact
Customer Service for instructions.
x Making sure your cellular phone is in pairing mode.
x Check your cellular phone's manual for instructions on Bluetooth
device pairing.
x Making sure your cellular phone supports the Bluetooth hands-free
profile.
x Checking the link order for that cellular phone.
Possible solutions
x Reset all the stations (see page 25).
x See if any station is in Privacy Mode.
x Move the handset closer to the base.
x See if any station is in Privacy Mode.
x Reset the handset (see page 25).
x See if you have 12 registered handsets.
Possible solutions
x Make sure the answering system is on.
x Make sure the base is plugged in.
x See if Record Time is set to
x Delete messages (memory may be full).
x See if another station is using the system.
x Make sure the phone is in standby.
x If there was a power failure, re-record your
personal outgoing message.
x Make sure call screening is turned on.
x Change the base speaker volume.
x Increase the Record
x Delete messages (memory may be full).
x You may have to change the line mode. Contact
Customer Service for instructions.
Announce Only.
Time.