Headlight beam level control
Coupe
Convertible
To adjust the headlight beam level, turn
the dial.
The following list shows examples of prop-
er dial settings. For loading conditions oth-
er than those listed, adjust the dial posi-
tion so that the beam level is the same
as the one obtained according to the list
when only the driver is in the vehicle. The
higher the number of the dial position, the
lower the headlight beam level.
Always keep the headlight beam at the
proper
level,
or
your
headlights
dazzle other road users.
Loading condition
Dial position
Driver only
Driver +
front passenger
Full passengers
(including driver)
Full passengers
(including driver) +
full luggage loading to
the luggage room
Driver + full luggage
loading
Emergency flashers
may
To turn on the emergency flashers,
push the switch.
0
All the turn signal lights will flash. To turn
them off, push the switch once again.
0
Turn on the emergency flashers to warn
other drivers if your vehicle must be
2
stopped where it might be a traffic hazard.
Always pull as far off the road as pos-
sible.
2
The turn signal light switch will not work
when the emergency flashers are operat-
ing.
1
121