Headlight Beam Level Control - Toyota 2005 Celica Owner's Manual

TURN SIGNALS
To signal a turn, push the headlight/
turn signal lever up or down to position
1.
The key must be in the "ON" position.
The lever automatically returns after you
make a turn, but you may have to return
it by hand after you change lanes.
To signal a lane change, move the lever
up or down to the pressure point (position
2) and hold it.
If the turn signal indicator lights (green
lights) on the instrument panel flash faster
than normal, a front or rear turn signal
bulb is burned out.
72
'05MY CELICA U (L/O 0409)

Headlight beam level control

To adjust the headlight beam level, turn
the dial.
The following list shows examples of prop-
er dial settings. For loading conditions oth-
er than those listed, adjust the dial posi-
tion so that the beam level is the same
as the one obtained according to the list
when only the driver is in the vehicle. The
higher the number of the dial position, the
lower the headlight beam level.
Always keep the headlight beam at the
proper level, or your headlights
dazzle other road users.
Loading condition
Driver only
Driver +
front passenger
Full passengers
(including driver)
Full passengers
(including driver) +
full luggage loading
Driver + full luggage
loading
may
2005 CELICA from Sep. '04 Prod. (OM20888U)
Dial position
0
0
1.5
2.5
4