Harman Stove Company Exception Installation & Operating Manual

Woodburning fireplace insert

Advertisement

Quick Links

Installation & Operating manual
The harman Exception woodburning Fireplace Insert
R10
"Ce manuel est disponible en Français sur demande"

SAFETY NOTICE

PlEASE REAd ThIS ENTIRE mANuAl bEFORE YOu INSTAll ANd uSE YOuR NEw ROOm hEATER. FAIluRE
TO FOllOw INSTRuCTIONS mAY RESulT IN PROPERTY dAmAgE, bOdIlY INjuRY, OR EvEN dEATh.
FOR uSE IN ThE u.S. ANd CANAdA. NOT SuITAblE FOR INSTAllATION IN mObIlE hOmES
IF ThIS hARmAN STOvE IS NOT PROPERlY INSTAllEd, A hOuSE FIRE mAY RESulT. FOR YOuR SAFETY, FOl-
lOw INSTAllATION dIRECTIONS.
CONTACT lOCAl buIldINg OR FIRE OFFICIAlS AbOuT RESTRICTIONS ANd INSTAllATION INSPECTION
REQuIREmENTS IN YOuR AREA.
CONTACT YOuR lOCAl AuThORITY (SuCh AS muNICIPAl buIldINg dEPARTmENT, FIRE dEPARTmENT,
FIRE PREvENTION buREAu, ETC.) TO dETERmINE ThE NEEd FOR A PERmIT.
CETTE guIdE d'uTIlISATION EST dISPONIblE EN FRANCAIS. ChEz vOTRE CONCESSIONNAIRE dE hAR-
mAN STOvE COmPANY.
R1
R7
SAvE ThESE INSTRuCTIONS.
R6

Advertisement

Table of Contents
loading

Summary of Contents for Harman Stove Company Exception

  • Page 1: Safety Notice

    Installation & Operating manual The harman Exception woodburning Fireplace Insert “Ce manuel est disponible en Français sur demande” SAFETY NOTICE PlEASE REAd ThIS ENTIRE mANuAl bEFORE YOu INSTAll ANd uSE YOuR NEw ROOm hEATER. FAIluRE TO FOllOw INSTRuCTIONS mAY RESulT IN PROPERTY dAmAgE, bOdIlY INjuRY, OR EvEN dEATh.
  • Page 2: Table Of Contents

    Exception F200 wood Insert INdEX Specifications Operation building a Fire maintenance Installation Parts diagram warranty Please read this entire manual before you install and use your new wood burning insert. Failure to follow instructions may result in property damage, bodily injury, or even death.
  • Page 3: Specifications

    The Harman F200 meets the U.S. Environmental Protection Agency’s emission limits for wood heaters sold after July 1, 1990. NOT FOR uSE IN mObIlE hOmES. SAFETY NOTICE: IF THIS HARMAN EXCEPTION MODEL F200 WOOD INSERT IS NOT PROPERLY INSTALLED. A HOUSE FIRE MAY RESULT. FOR YOUR SAFETY, FOLLOW THE INSTALLATION DIRECTIONS CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION REQUIREMENTS IN YOUR AREA.
  • Page 4: Operation

    INSTALLED, A HOUSE FIRE MAY RESULT. the door closed, while turning the handle counterclock- wise to the 6 o'clock position. If the latch on your Exception door needs adjust- FOR YOUR SAFETY, FOLLOW INSTALLATION ment, follow the instructions given in the Maintenance DIRECTIONS.
  • Page 5 Exception F200 wood Insert The Combustion Process Controls Combustion in your Harman Exception wood Two important controls - the damper handle and insert is controlled very precisely. During a wood fire, pri- the air control lever regulate the operation and output of mary combustion air enters the bottom of the insert, is di- the insert.
  • Page 6: Building A Fire

    Exception F200 wood Insert building and maintaining the Fire Set the air control lever at the maximum heat output setting, all the way pulled out. Open the bypass damper by pulling the handle forward (approximately 3"). The convection blower should be off for the first five minutes after a reload.
  • Page 7 Exception F200 wood Insert the first notch, the blower may be set to your desired comfort Overfiring results in excessive fuel consumption, and level. Be sure that the blower cord does not run under, over, may cause parts of the insert to glow red. If you notice signs above or in front of the insert.
  • Page 8: Maintenance

    Remove pieces care- periodically with a soft cloth. For more thorough cleaning, fully. Replace the glass only with Harman Stove Company wait until the insert is cool before using a damp cloth to replacement glass; do not use substitutes.
  • Page 9 Gaskets are used at strategic positions when build- To clean deposits from the surface of the connec- ing the Harman Exception for controlling the path that tor, use a stiff wire brush after dismantling the connector incoming and outgoing air and gases take through the assembly.
  • Page 10: Installation

    Installation Exception F200 wood Insert Assembly Top Wing Parts To be Assembled Right Wing Right Corner Trim Damper Control Blower Variable Left Wing Speed Control Blower Air Adjuster Rod Ash Lip With Base Cover Gold Trim Left Corner Trim Assembling The Corner Panels...
  • Page 11 Exception F200 wood Insert warning: do not install in sleeping room. Floor Protection In all installations, the area under and around the insert must be protected from falling ash and live coals. This protector must be of noncombustible material, and positioned as shown in the accompanying illustration.
  • Page 12 Exception F200 wood Insert masonry direct Connect Installation For direct connect and positive connect installations, ensure that the liner is securely This method is most commonly used because it is connected to the insert flue collar. less expensive than the other methods. A steel block-off...
  • Page 13: Leveling Bolts

    Exception F200 wood Insert Chimney Cap Zero Clearance Fireplace Requirements Sealing Plate These are factory built insulated metal fireplaces that are usually framed into the wall with lumber. The term, "Zero Clearance" refers to the fact that wood fram- ing material can be in contact with the outer shell of the fireplace.
  • Page 14: Parts Diagram

    Exception F200 wood Insert Exception F200 Parts Parts list BODY WELDMENT 1-89-09102 3/8 X 1-7/8 DOOR PIN 4-30-00138-2 DAMPER ARM COVER 2-00-34133 GLASS CLIPS 2-00-05202 DAMPER LINK 2-00-34120 GLASS BOLTS 3-30-5110240382 WOODEN KNOB 3-40-05662 ASH LIP TRIM 3-43-34001 LEFT SIDE COVER...
  • Page 15 Exception F200 wood Insert Appendix A Determining Thickness Requirements of Alternate Hearth Extension Materials. If a manufacturer’s specifications call for a material having a minimum thickness of one inch with a certain k value, any material substituted for that specified material must have the same thickness and have the same or lower k value, or if the k value of the selected alternate material is higher, a greater thickness of that material must be used.
  • Page 16: Warranty

    Harman Stove Company. This warranty does not apply if the product has been altered in any way after leaving the factory. Harman Stove Company and its agents assume no liability for “resultant damages of any kind”...

Table of Contents