Binatone SYMPHONY 2610 System User Manual page 62

"The Caller You need to subscribe to the Caller Display feature
Display feature from BT or your network service provider. You should
isn't working." find contact details on your phone bill.
The caller may have withheld their number by dialling
141. Or they may be calling from a network that does
not transmit the caller's number (for example, it may be
an international call).
"When I try to If you're using a Symphony 2610 multi-handset system,
make a call, I check that another handset isn't already busy on a call.
hear Busy tone."
"The volume in Make sure you're holding the earpiece correctly over
the earpiece is your ear.
low when I'm
Adjust the volume using the
on a call."
Intercom and transfer
"I can't transfer Make sure the other handset is in range of the base unit.
a call."
Make sure you're dialling the correct number for the
other handset ( 1 to 6 ).
The answering machine
"The machine Make sure the answering machine is switched on.
won't record
The machine's memory may be full. Delete some
messages."
messages to make room for new ones.
Check which outgoing message (OGM) is selected;
and that this OGM is not set as 'announcement only'.
If you have a network answer machine service set with
your line provider(1571 service) and you wish your tele-
-phone to answer your calls then you must disable the
network answer service; Or set the answer machine
rings to five or less.
Binatone Help Line: 0845 345 9677
Troubleshooting
or button.
59
(Local Call rate)