Binatone SYMPHONY 2610 System User Manual page 58

Flash time
You won't need this unless you're using your Symphony
2610 on a PBX.
To change the length of the Recall
leave it at the default setting of
requires a different Recall setting.
Modify PIN
To change the base unit's PIN code . The default PIN is
0000, you can change it to any other four-digit number:
Old Pin: key in the current PIN then select
New Pin:
key in the
Confirm:
key in the
SOS Numbers
To set up to three numbers which
call barring , so calls to them are always possible.
If you select this, it need to enter PIN(default 0000),
prompted
you'll be
Ok Back
or .
First Ring
For SMS subscriber, it is recommended to
ON
program ;
For non-SMS subscriber, it is recommended to
OFF
program .
Base Default
To return all base settings to their defaults. If you
select this, it need to enter PIN(default 0000), you'll be
Confirm?
prompted
Register
See page 28 to 29.
TAM See page 30 to 40.
Binatone Help Line: 0845 345 9677
Quick reference guide to the menus
signal
short unless your PBX
OK.
OK.
new PIN then select
OK.
new PIN again then select
these
override
Confirm? and you can select
.
and you can select Ok or Back
55
(Local Call rate)