Binatone SYMPHONY 2610 System User Manual page 57

Quick reference guide to the menus
The options are:
Bar Mode
— turn Call Barring and
Bar Numbers
— set up to four barred numbers.
Select base If your handset is already registered to more than one
base unit, you can select which one you want and
confirm using the
Select
To return all handset settings to their defaults. If you
HS default
select this, it need to enter PIN(default 0000), you'll be
Confirm?
prompted
Base Settings
Base unit settings, which affect the whole system —
not just your individual handset.
Terminate HS
To de-register a handset
You'll be prompted to key PIN in before you can go any
further, select the handset to de-register from base unit.
!
Be careful using this function,if you de-register a handset
by mistake,you'll need to re-register it to the base unit.
Ring Setup
To change the base unit's ringer volume and melody
Base Melody
—
There are five melodies. Scroll
between the options to
and select
you want.
Base Volume
—
There are five volume levels, or you
can select
Please note — if you select a long melody, you may find
that your Symphony 2610 base unit carries on ringing for
a few moments after you've answered a call using another
phone connected to your line
Dial Mode Tone / pulse two dialing mode can be set.
54
http://www.binatoneonline.com/
Off
button.
Ok Back
and you can select or .
play them,
OK when you find the one
Off to turn the ringer off
altogether. The handset(s) will still
ring for incoming calls when the
base unit's ringer is
turned off.
6
.