Setting Timer Programs - Pioneer RCS-656HX Operating Instructions Manual

Using the digital electronic program guide
06
ENTER
2 Select a TV program.
D007
• Press CHANNEL +/– to skip to the next or previous
channel list page.
• Information about the selected program appears in
the information window.
• To watch a program currently on air, select the
program (then press ENTER).
• You can check information about programs
scheduled up to 1 week ahead, depending on
conditions.
• Depending on conditions, it may take some time to
acquire EPG data.
INFO
3 Press to view more information about the
selected program.
Detailed information appears in the schedule window.
If the screen contains further information, More ... is
displayed.
• To quit the display of detailed information, press
INFO again (or RETURN/EXIT).
D007
************
*************
**************************
4 Press to exit the Digital EPG screen.
GUIDE
Note
1 The general program list does not show programs that have already finished.
76
En
1
13:40 - 14:05
More...

Setting timer programs

Using the Digital EPG, it's easy to set digital TV programs
for recording.
1 Press to display the Digital EPG screen.
GUIDE
ENTER
2 Select a program.
• Select a program currently on-air: press ENTER to
close the Digital EPG screen watch the channel
immediately, or press RED to set the program for
recording immediately.
• Select a program not yet started then press ENTER or
RED to set the program for recording.
D007
ENTER
3 Select 'Yes' to confirm.
D007
A red clock icon appears for the program.
4 Press to exit the Digital EPG screen.
GUIDE