Pioneer RCS-656HX Operating Instructions Manual page 130

The Initial Setup menu
16
Setting
Digital Tuner
Replace Channels
If you execute a Replace Channels command, any timer recordings set for D.TV channels will be erased.
Add New Channels
Channel Sort
Channel Options
Auto Skip
Signal Check
Aerial Power
• If the setting keeps reverting to Off when you try to set to On or Auto, the aerial may not be connected properly, or it may be shorted. In either
case, check the connection and try making the setting again.
D.TV Language
130
En
Options Explanation
Next Screen Scans for digital channels and replaces all the channel presets with the
results. Before the scan starts you will need to select your country.
After the scan is complete the recorder tells you whether any new channels
were found, and if so, how many.
(You can cancel the scan before it has finished by pressing HOME MENU
or RETURN/EXIT. In this case, no channels are set.)
Next Screen
Automatically scans for new digital channels.
After the scan is complete the recorder tells you whether any new channels
were found, and if so, how many.
(You can cancel the scan before it has finished by pressing HOME MENU
or RETURN/EXIT. In this case, no new channels are set.)
Next Screen
Use this screen to sort channel presets into your preferred order. Use the
Use the cursor buttons again to highlight the position you want to move
the channel preset to, then press ENTER again.
(If there are more channel presets than will fit on one screen, you can
select the next/previous page by highlighting the small triangular marks
and pressing ENTER.)
Next Screen From this screen you can skip or lock channels. Locked channels will
require the correct password to be entered before the channel can be
watched. Use the
press ENTER to toggle the preference.
To enter this screen, input the parental lock password when prompted (if
one has not yet been set then the password you enter becomes the parental
lock password).
Off •
No channels are automatically skipped.
Radio Radio channels are skipped when selecting channels.
Data
Data channels are skipped when selecting channels.
Radio & Data Radio and data channels are skipped when selecting channels.
Next Screen
Use this screen to check the signal level and quality of digital channels.
Use the
then press ENTER to scan for new channels; press HOME MENU to exit.
On Power is supplied to the connected aerial (antenna) when this recorder is
on or in standby.
Auto Power is supplied to the connected aerial (antenna) only when this recorder
is on.
Off •
This recorder does not supply power to the connected aerial (antenna).
Next Screen From this screen you can set your Primary and Secondary Audio preference
for multilingual digital broadcasts, and your Primary and Secondary
Subtitle preference for programs that are broadcast with subtitles. Use
the
buttons to highlight the channel you want to move, press ENTER.
buttons to highlight a preference box and
buttons to change the RF channel; select Add New Channels
buttons to highlight a field then use the buttons to change it.