Pioneer RCS-656HX Operating Instructions Manual page 57

Getting started
ENTER
• Select your country.
k Setting
k Setting Country Selection
t Line System t Line System
er Save er Save Country
P
• Auto-tuning channels
The Auto Scan option automatically scans and sets the
channel presets.
Tuning
Cancel
• Downloading channels from your TV
Use the Download from TV option to download all the
channels that your TV is tuned to.
Downloading
Cancel
ENTER
9 Select 'Auto' for automatic time setting,
or 'Manual' to set the clock manually.
If the clock was already set from a D.TV channel in step 6 ,
this step is skipped.
k Setting Clock Setting
t Line System
Auto
er Save Auto
P Manual
• Auto clock setting
Some TV channels broadcast time signals together
with the program. This recorder can use these
signals to set the clock automatically.
Set 'Clock Set CH' to the channel preset number
that broadcasts a time signal, then move the
cursor down to 'Start' and press ENTER.
k Setting Auto Clock Setting
t Line System
Date
er Save
Time
P
p Navigator p Navigator
Clock Set CH
The recorder takes a short while to set the time. After
you see that it's set, select Next to proceed.
k Setting Auto Clock Setting
t Line System
Date S U N 0 1 / 0 1 / 2 0 0 6
er Save
Time
P
p Navigator p Navigator
Clock Set CH
If the time could not be set automatically, press
RETURN/EXIT to go back to the previous screen and
select Manual.
Austria
32/99
Pr 5
32/99
– – / – – / – – – –
– – : – –
P r 1
S t a r t
1 1 : 2 0
P r 1
S t a r t
N e x t
• Manual clock setting
If no stations in your area are broadcasting time
signals, you can set the clock manually.
Use the buttons to set your time zone.
You can set this by selecting a city or a time relative
to GMT.
k Setting Manual Clock Setting
t Line System
Time Zone
er Save
P
p Navigator p Navigator Summer Time
Press then use the
or 'Off' for summer time, then press ENTER.
Select On if you are currently using summer time.
k Setting Manual Clock Setting
t Line System
Time Zone
er Save
P
p Navigator p Navigator Summer Time
Set the date (day/month/year) and time, then
press ENTER to make all the settings.
k Setting Manual Clock Setting
t Line System
Date SUN
er Save
P
Time
p Navigator p Navigator
Time Zone
Summer Time
• Use the buttons to change the value in the
highlighted field.
• Use the buttons to move from one field to
another.
• You can go back to the previous screen at anytime in
the Setup Navigator by pressing RETURN/EXIT.
ENTER
10 Select the EPG (Electronic Program Guide)
type to use.
• GUIDE Plus+: Use the Gemstar GUIDE Plus+ EPG
(see also Setting up the GUIDE Plus+™ system on
page 59 and Using the GUIDE Plus+™ electronic
program guide on page 62).
• Digital EPG: Use the SI EPG (program information
broadcast together with digital channels).
• If no channels were found when scanning for digital
TV channels then this screen does not appear and
the EPG is set according to the country set in step 7
above.
1/2
Austria
Vienna
O f f
buttons to select 'On'
1/2
Austria
Vienna
O n
2/2
01 / 01 / 2006
00 : 00
Austria
Vienna
O n
04
57
En