Table of Contents
Advertisement
SPECIAL SETTINGS _________________
Manual station search
If the station search does not find a particular station automatically,
it can search for it using the manual search. To do this all the para-
meters for the station must be correctly entered. You can find the
latest transponder information on the teletext pages of various broa-
dcasters, in a current satellite TV magazine or on the Internet.
1
Open main menu with »
2
Select »Search for Channels« with »P-« or »P+« and press
»OK« to confirm.
Select »Manual Search« with »P-« or »P+« and press »OK«
3
to confirm.
4
Select the required line with »P-« or »P+«.
– »Satellite«:
– »Transponder«: Select transponder with » « or » «.
– »Frequency«:
– »Symbol Rate«: Enter the five-digit symbol rate of the chan-
– »Polarisation«: Select polarisation of the channel (»Horizon-
– »Channels to
search for«:
Select the »OK« button with »P-« or »P+« and press »OK« to
5
start the search.
– The »Scanning« line indicates the progress of the search.
– The search is finished when the message »Scanning comple-
te« appears.
Notes:
If the desired channel is not found, the frequency needs to be
slightly adjusted (± 5 MHz) and the search restarted.
A search will only be successful if the display quality
The search can be ended prematurely with »Z«.
New stations can now be added to the "old" channel list;
6
or
the "old" channel list can be replaced by the new channel list;
or
i
«.
Select satellites with » « or » «.
Enter the frequency of the channel as five
digits using »1...0« (only required if the
transponder is not pre-defined).
nel using
»1 ...
0« (only required if the
transponder is not pre-defined).
tal« or »Vertical«) with » « or » « (only
necessary if the transponder is not pre-defi-
ned).
Select »All«, »Scrambled« or »Free to air«
Stations with » « or » «.
30 %.
37
Advertisement
Table of Contents
