Table of Contents
Advertisement
ADDITIONAL FUNCTIONS
Manual station search (expert search)
You enter the channel to be searched directly during the manual
search.
1
In the main menu, select »Search for Channels« with »P-« or
»P+« and press »OK« to confirm.
Note:
You only need to change the antenna settings if the antenna
type (passive, active) has changed.
Select »Manual Search« with »P-« or »P+« and press »OK« to
2
confirm.
Select »Frequency« with »P-« or »P+«.
3
Select the channel with » « or » «, or type the frequency
4
directly into the »Frequency (MHZ)« line using the number
buttons.
Select »Bandwidth« with »P-« or »P+«.
5
Select the wavelength with » « or » «.
6
Note:
Select the »All« option in »Channels to search for« if you would
also like to receive encoded stations.
Select »Start Scan« with »P+« or »P-« and press »OK« to start
7
the search.
– A message will appear once the search has ended.
Press » « or » « to select one of the following options:
8
»Yes, add new channels«
– The stations that have been found are added to the station list.
»Yes, replace old channellist«
– The old station list is overwritten with the new stations.
»No, discard new channels«
– The new stations are not stored.
Press »OK« to confirm.
9
Press »i« to finish the setting.
10
_________________
29
Advertisement
Table of Contents
