SPECIAL SETTINGS
Manual station search (expert search)
You enter the station to be searched directly during the manual
search.
i
1
Press »
« to open the main menu.
2
Select »Search for Channels« with »P-« or »P+« and press
»OK« to confirm.
Note:
You only need to change the antenna settings if the antenna
type (passive, active) has changed.
Select »Manual Search« with »P-« or »P+« and press »OK« to
3
confirm.
4
Select »Frequency« with »P-« or »P+«.
5
Select the channel with » « or » « or enter the frequency
directly at »Frequency (MHz)« using the number buttons.
Note:
Select the »All« option in »Channels to search for« if you would
also like to receive encoded stations.
Select the »OK« button with »P+« or »P-« and press »OK« to
6
start the search.
– A message will appear once the search has ended.
Press » « or » « to select between:
7
»Yes, add new channels«
– The stations that have been found are added to the station list.
»Yes, replace old channel list«
– The old station list is overwritten with the new stations.
»No, discard new channels«
– The new stations are not stored.
Confirm with »OK«.
8
Press »i« to conclude the setting.
9
______________________________
29