Table of Contents
Advertisement
30
SPECIAL SETTINGS
Manual station search
If the station search does not find a particular station automatically,
it can search for it using the manual search. To do this all the
parameters for the station must be correctly entered. You can find
the latest transponder information on the teletext pages of various
broadcasters, in a current satellite TV magazine or on the Internet.
i
Press »
« to open the main menu.
1
– The main menu is displayed.
Select »Search for Channels« with »P-« or »P+« and press
2
»OK« to confirm.
3
Select »Manual search« with »P-« or »P+« and press »OK« to
confirm.
Select by pressing »P-« or »P+«.
4
– »Satellite«:
– »Transponder«:
– »Frequency«:
– »Symbol Rate«:
– »Polarisation«:
– »Channels to search
for«:
Press »OK« to start the search.
5
Notes:
»Scanning« shows the progress of the search.
If the desired channel is not found, the frequency needs to be
adjusted slightly (± 5 MHz) and the search restarted.
A search will only be successful if the display quality
The search is finished when the message »Search complete«
appears.
You can stop the search prematurely by pressing »Z«.
New stations can now be added to the "old" channel list,
6
the "old" channel list can be replaced by the new channel list or
the search result can be discarded.
Choose the desired setting with » « or » « and press »OK«
to confirm.
Press »i« to conclude the setting.
7
______________________________
Press » « or » « to select the satel-
lite.
Select transponder with » « or » «.
Enter five-digit frequency of channel
with »1...0« (only required if the
transponder is not predefined).
Enter five-digit symbol rate of channel
with
»1 ...
0« (only required if the
transponder is not predefined).
Select polarisation of channel (»hori-
zontal« or »vertical«) with » « or
» « (only necessary if the transpon-
der is not predefined).
Select with » « or » «.
30%.
Advertisement
Table of Contents
