Edge Erase; Image Shift - Xerox 4112 User Manual

Copy

Edge Erase

When you make copies with the document-feeder in the open position or from a book, black
shadows sometimes appear along the edges and center margin of the paper. If this happens,
you can make copies with the shadows erased.
1. From the Copy tab screen, select the Layout Adjustment tab.
2. Select Edge Erase...
3. Select the applicable Edge Erase option.
4. When selecting the Individual Edges button or a preset button, use the control buttons to
set the Side 1 and Side 2 erase values.
5. Select Original Orientation... and set and save the orientation.
6. Select Save to save the changes.
Notes
• When making 2 sided copies, the same border erase amount is set for both sides 1 and 2.
• If you set Reduce/Enlarge, the edge erase dimensions are reduced/enlarged in proportion
to the ratio you configured.

Image Shift

Tip
This section, related screen and functions are identical to the information previously presented
in the Copy tab Image Shift section (See Image Shift on page 2-17) for this information.
2-28
Xerox 4112/4127 Copier/Printer
User Guide