Power Management Setup - Gigabyte 8I945PE-FS User Manual

2-4

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
ACPI Suspend Type
USB Device Wake-Up From S3
Soft-Off by PWR-BTTN
PME Event Wake Up
Power On by Ring
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
: Move Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1/POS(Power On Suspend).
S3(STR) Set ACPI suspend type to S3/STR(Suspend To RAM). (Default value)
USB Device Wake-Up From S3
Disabled Disable USB Device Wake-Up from S3.
Enabled Enable USB Device Wake-Up from S3. (Default value)
Soft-off by PWR-BTTN
Instant-off Press power button then Power off instantly. (Default value)
Delay 4 Sec. Press power button 4 sec. to Power off. Enter suspend if button is pressed
PME Event Wake Up
Disabled Disable this function.
Enabled Enable PME Event Wake up. (Default value)
Power On by Ring
Disabled Disable Power on by Ring function.
Enabled Enable Power on by Ring function. (Default value)
Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
Disabled Disable this function. (Default value)
Enabled Enable alarm function to POWER ON system.
If Resume by alarm is Enabled.
Date (of Month) Alarm :
Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)
Power Management Setup
[S3(STR)]
[Enabled]
[Instant-Off]
[Enabled]
[Enabled]
[Disabled]
0
0 : 0 : 0
+/-/PU/PD: Value
F6: Fail-Safe Default
less than 4 sec.
0~31
- 31 -
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help
BIOS Setup