Gigabyte 8I945PE-FS User Manual page 27

Boot Up Floppy Seek
During POST, BIOS will determine if the installed floppy disk drive is 40 or 80 tracks. 360K
type is 40 tracks 720K, 1.2M and 1.44M are all 80 tracks.
Disabled BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360K.
(Default value)
Enabled BIOS searches for floppy disk drive to determine if it is 40 or 80 tracks. Note
that BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are all 80
tracks.
Boot Up Num-Lock
On Keypad is number keys. (Default value)
Off Keypad is arrow keys.
Password Check
Setup The system will boot but will not access to Setup page if the correct
password is not entered at the prompt. (Default value)
System The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.
If you want to cancel the setting of password, please just press ENTER to make [SETUP] empty.
CPU Hyper-Threading
This option appears only when the processor you install supports Intel
Technology.
Enabled Enable CPU Hyper-Threading feature. Please note that this feature only works
for operating system with multiprocessors mode supported. (Default value)
Disabled Disable CPU Hyper-Threading.
Limit CPUID Max. to 3
Enabled Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled Disables CPUID Limit for windows XP. (Default value)
No-Execute Memory Protect
Enabled Enables No-Execute Memory Protect function. (Default value)
Disabled Disables No-Execute Memory Protect function.
CPU Enhanced Halt (C1E)
Enabled Enables CPU Enhanced Halt (C1E) function. (Default value)
Disabled Disables CPU Enhanced Halt (C1E) function.
CPU EIST Function
Enabled Enable CPU EIST function. (Default value)
Disabled Disable CPU EIST function.
Full Screen LOGO Show
Enabled Display Full Screen LOGO during POST. (Default value)
Disabled Don't dispaly Full Screen LOGO during POST.
Intel OnScreen Branding
Enabled Enable this function. (Default value)
Disabled Disable this function.
(Note) This item will show up when you install a processor which supports this function.
(Note)
(Note)
(Note)
- 27 -
Hyper-Threading
®
BIOS Setup