Gigabyte 8I945PE-FS User Manual page 14

6) IDE (IDE Connector)
An IDE device connects to the computer via an IDE connector. One IDE connector can connect to
one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical
drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as Master
and the other as Slave (for information on settings, please refer to the instructions located on the IDE
device).
7) SATA0/SATA1/SATA2/SATA3 (SATA 3Gb/s Connector)
SATA 3Gb/s can provide up to 300MB/s transfer rate. Please refer to the BIOS setting for the
Serial ATA and install the proper driver in order to work properly.
8I945PE-FS Motherboard
40
2
Pin No.
1 7
7
1
- 14 -
39
1
Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND