Accessing The Dvr Through Safari; Configuring Safari - Q-See QT528 User Manual

STEP 13. Click the Reset button
STEP 14. Click "Yes" when asked, "Are
you sure you want to change the
setting for this zone?"
STEP 15. Click OK
STEP 16. Click Apply
STEP 17. Click OK
STEP 18. Close Internet Explorer
You are now ready to monitor your DVR from your computer, please proceed to Section 7.7
Using the Remote Access Software.
66
PICTURE 7-54

7.6 ACCESSING THE DVR THROUGH SAFARI

CONFIGURING SAFARI

The Safari Client WebKit Plugin can only operate in 32-bit format. Please follow the three steps
below to set your Safari browser to run in 32-bit mode.
1. Right-click on the Safari browser icon in your Toolbar and select "Show in Finder."
PICTURE 7-55
2. Right-click on the Safari icon in the application list and select "Get Info" in the menu.
PICTURE 7-56
67