Q-See QT426 User Manual page 59

H.264 dual stream network dvr 16 channel cif@480fps & d1@120fps digital video recorder

Hide thumbs Also See for QT426:

Table of Contents

REMOTE SURVEILLANCE

Setting up MYQ-SEE DDNS:

NOTE: Before you setup DDNS you must first set up Port Forwarding as directed in Section 7.3 PORT

FORWARDING.

Once you have enabled Port Forwarding, you can configure your DDNS information by

following these steps:

a. Using a computer that is connected to the same network as your Q-See DVR, use your IE Browser to go to

http://myq-see.com.

b. Click on the New User? Link at the bottom of the page (http://myq-see.com/reg.asp).

c. Complete the registration process by following the on-screen directions and click the [Submit] button at the

bottom of your screen (Fig 7-8).

Fig 7-8 Registration

56 |

P a g e

QT426 User Manual

Table of Contents

Show Quick Links

Table of Contents