Basic Configuration; Setup - Q-See QT426 User Manual

MAIN MENU SETUP GUIDE

4.1 Basic Configuration

Basic configuration includes three sub menus: system, date& time and DST.

4.1.1 Setup

Step1: Enter into Setup configurationbasic configurationsetup; refer to Fig 4-3:
SETUP
Step2: In this interface user can setup the device name, device ID, video format, max network users, VGA resolution
and language. The explanations for each display are shown below:
Device name: the name of the device. It will display on the client end or CMS and help user to recognize the
device remotely.
Video format: two modes: PAL and NTSC. User can select the video format according to that of camera, in
USA and Canada we use NTSC cameras.
Password Check: if you enable this option, user needs to input user name and password to do corresponding
operations in system configuration.
Show time: display time in live view.
Show wizard: check this item, an opening wizard will display with time zone and time setup information
Max network users: set the maximum number of network connections
VGA resolution: the resolution of live display interface, options are: VGA800*600, VGA1024*768,
VGA1280*1024 and CVBS
Note: Switching between VGA and CVBS will change the menu output mode, please connect to
relevant monitor, VGA for VGA monitor, CVBS for TV or monitor that is connected using BNC adapter.
Language: setup the menu language.
Note: after changing the language and video output, the device needs to restart.
Fig 4-3 Basic Configuration
18 | P a g e
QT426 User Manual