Gigabyte Touch Note M1028 User Manual page 44

Caution
• Unplugging or ejecting a device that supports safe removal
without first using the Safe Removal application to warn the
system can cause data to be lost or your system to become
unstable. For example, if you use Safe Removal, however,
you can warn the system before you unplug or eject a device,
preventing possible loss of data.
Note
• For removable storage devices that can safely be removed while
the system is on, the system disables write caching by default.
It does this so the devices can be removed without loss of data.
When write caching is disabled, however, the system will likely
experience slower performance, so be sure to enable write
caching when you have finished removing the device.
Does T1028(M1028) provide a hardware switch or function
button to enable/disable the Bluetooth function?
T1028(M1028) provides a combined function button to enable/
disable the 3G (Fn+F10) and Bluetooth (Fn+F11) functions.
What are the considerations for the use of the touch control
screen?
In accordance with the principle of panel structure, the
surroundings of the touch control panel are highly sensitive.
Hence, drawing lines along the surroundings of the chassis
is strictly prohibited as this may damage the Pet/film due to
extreme pressure or cause the internal liners/pads on the edges
T1028(M1028) Touch Note USER'S MANUAL
of the outer shell to displace, therefore squeezing the edges of
the touch control screen and causing the screen to fail.
What is the capacity of SDHC card that T1028(M1028) can
support?
The specification of SDHC that T1028(M1028) SD card reader
supports shall be in accordance with that of the SD Association.
Currently, the maximum capacity announced by SD Association
is 32GB
http://www.sdcard.org/developers/tech/sdhc/
How can T1028(M1028) be upgraded in the DOS and Windows
mode?
Please refer to how to upgrade T1028(M1028) in the DOS and
Windows mode??
Can T1028(M1028) change the 2.5-inch SATA interface SSD
and install it for use with Windows XP itself?
Currently the T1028(M1028) series delivered by Gigabyte does
not support SATA SSD. In case of any version update in the
future, the specification will be announced on the website of
Gigabyte.
35 35