3.3 Advanced Menu
20
20
BOOT CONFIGURATION
numlock on/off
Choose whether to set the Numlock On when booting.
ADVANCED S3
Advanced setup of the standby mode ENABLE/DISABLE
Keyboard Language
[disable]/[German]/[Korean]/[Japanese]/[User interface (American
keyboard, Chinese)]
3.4 Security Menu
Set Supervisor Password
A supervisor password must be set before a lower-level user
password can be set. After selecting Change Supervisor
Password, press Enter. You will be prompted for the new
password, and then again to verify it. Type in 6 or fewer keystrokes.
If you make an error, press Esc to start over.
Set User Password
With a User password, you can enter the Setup Utility and change
or remove the User password, but you cannot enter the Setup
Utility and change or remove the Supervisor password, nor enable
diskette access if it has been disabled.