Removing The Battery Pack; Connecting System To Ac Adapter; Battery Capacity Inspection - Gigabyte Touch Note M1028 User Manual

2.7 Removing The Battery Pack

This battery pack can easily be removed and replaced. Make sure
that the computer is properly shutdown before changing the battery
pack. If you would like to change the battery pack while power is
on, make sure this battery pack is not the only electrical source to
the system unit. Follow the steps below to remove the battery pack.
16 16
Make sure the system is properly shutdown.

Flip the system upside down as shown.

Push the battery lock to the unlock position as shown by #1.

Remove the battery pack as shown by #2.

To insert the battery pack, reverse the steps above.
2
1
2.8

Connecting System To AC Adapter

C o n n e c t A C

adapter to system
unit as shown by #1.
Connect AC power cord to

AC adapter as shown by #2.
Connect other end of power cord to an

electrical outlet as shown by #3.
2.9

Battery Capacity Inspection

When system is turn off, press the function key (Please refer to 1.2)
to inspect the battery capacity.The LED indicators will show the
battery capacity status.
1
3
2