Sram Installation; Sync. Sram (Pipeline Burst Sram); Cpu Installation And Jumpers Setup - Gigabyte GA - 586ATX User Manual

64MB * 2pcs.
64MB * 2pcs.
64MB * 2pcs.
16MB * 2pcs. 64MB * 2pcs.
64MB * 2pcs.
64MB * 2pcs.
64MB * 2pcs.
64MB * 2pcs.
64MB * 2pcs. 32MB * 2pcs.
64MB * 2pcs. 64MB * 2pcs.

3.5. SRAM INSTALLATION

Sync. SRAM (Pipeline Burst SRAM)

If Sync SRAM Module is installed, it consists of Pipeline Burst 2 Pcs 32 K x
64 512K.
There is no jumper for cache size setting.

3.6. CPU INSTALLATION AND JUMPERS SETUP

The system speed depends on the frequency of CLOCK GENERATOR. The
user can change SW selection to set up the system speed to 60 MHz or 66
MHz for 3.3V/2.5V Pentium
PR166) / AMD-K6(166/180/200(2.9V)/233(3.2V)), Cyrix / IBM 6x86 (PR150+
/ PR166+), Cyrix / IBM 6x86L (PR150+/PR166+ (2.8V)), Cyrix / IBM 6x86MX
(PR166(60x2.5) / PR200(66x2.5) / PR233(66x3)).
The mainboard can use Pentium
AMDK5, AMD-K6, Cyrix / IBM 6x86, CPU, and the CPU speed must match
with the frequency of CLOCK GEN. It will cause system hanging up if the
CLOCK GEN.'S frequency is faster than CPU's.
8MB 8MB
8MB 16MB
16MB 16MB
32MB
8MB 32MB
16MB 32MB
32MB 32MB
Processor (90-233 MHz) / AMDK5(PR133 /
Processor, P54CT, MMX or P54CTB,
3-9
Hardware Installation
144MB
152MB
160MB
160MB
160MB
168MB
176MB
192MB
192MB
256MB