Sram Installation; Sync. Sram (Pipeline Burst Sram); Cpu Installation And Jumpers Setup - Gigabyte GA-586T2 User Manual

3.5. SRAM INSTALLATION

Sync. SRAM (Pipeline Burst SRAM)

If Sync SRAM Module is installed, it consists of Pipeline Burst 1 Pcs 64 K x
64 512K.
There is no jumper for cache size setting.

3.6. CPU INSTALLATION AND JUMPERS SETUP

The system speed depends on the frequency of CLOCK GENERATOR. The
user can change SW selection and JP2 to set up the system speed to 60
MHz, 66 MHz or 75 MHz for 3.3V/2.8V Pentium
AMDK5 (PR133 / PR166)/ AMD-K6(166/180/200(2.9V) / 233(3.2V)), Cyrix /
IBM 6x86 (PR150+ / PR166+ / PR200+), Cyrix / IBM 6x86L (PR150+ /
PR166+ / PR200+ (2.8V)), Cyrix / IBM 6x86MX (PR166GP (60x2.5, 66x2
2.9V) / PR200GP (66x2.5, 75x2 2.9V)/PR233GP (66x3, 75x2.5 2.9V).
The mainboard can use Pentium
AMDK5, AMD-K6, Cyrix / IBM 6x86, CPU, and the CPU speed must match
with the frequency of CLOCK GEN. It will cause system hanging up if the
CLOCK GEN.'S frequency is faster than CPU's.
M
The CPU is a sensitive electric component and it can be easily
damaged by static electricity, so users must keep it away from
metal surface when the CPU is installed onto mainboard.
M
When the user installs the CPU on socket, please notice that the
PIN 1 of CPU is in the same corner as the PIN 1 of socket!
M
Before the CPU is installed, the mainboard must be placed on a flat
plane in order to avoid being broken by the pressure of CPU
installation.
Hardware Installation
Processor (90-233 MHz) /
Processor, P54CT, MMX or P54CTB,
3-9