Gigabyte GA-586TX3 User Manual page 99

Ö
Should Have ISA Board But Not Found
PLEASE RUN EISA CONFIGURATION UTILITY
The board installed is not responding to the ID request, or no board ID
has been found in the indicated slot.
F
When this error appears, the system will boot in ISA mode, which allows
you to run the EISA Configuration Utility.
Ö
Slot Not Empty
Indicates that a slot designated as empty by the EISA Configuration
Utility actually contains a board.
F
When this error appears, the system will boot in ISA mode, which allows
you to run the EISA Configuration Utility.
Ö
SYSTEM HALTED, (CTRL-ALT-DEL) TO REBOOT ...
Indicates the present boot attempt has been aborted and the system
must be rebooted. Press and hold down the CTRL and ALT keys and
press DEL.
Ö
Wrong Board In Slot
PLEASE RUN EISA CONFIGURATION UTILITY
The board ID does not match the ID stored in the EISA non-volatile
memory.
F
When this error appears, the system will boot in ISA mode, which allows
you to run the EISA Configuration Utility.
Appendix A: Post Message
A-5