Gigabyte GA-586TX3 User Manual page 62

CPU TEMPERATURE PROTECT
Virus Warning
CPU Internal Cache
External Cache
Quick Power On Self Test
Boot Sequence
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Security Option
PCI/VGA Palette Snoop
OS Select For DRAM >64MB
Figure 4.3: BIOS Features Setup
CPU TEMPERATURE PROTECT
The default value is YES.
Yes Enable CPU TEMPERATURE PROTECT.
No Disable CPU TEMPERATURE PROTECT.
Virus Warning
This category flashes on the screen. During and after the system boots
up, any attempt to write to the boot sector or partition table of the hard
disk drive will halt the system and the following error message will
appear, in the mean time, you can run anti-virus program to locate the
problem.
The default value is Disabled.
Enabled Activate automatically when the system boots up causing
a warning message to appear when anything attempts to
access the boot sector or hard disk partition table.
Disabled No warning message to appear when anything attempts to
access the boot sector or hard disk partition table.
ROM PCI / ISA BIOS
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
: YES Video BIOS Shadow
: Disabled C8000 - CBFFF Shadow
: Enabled CC000 - CFFFF Shadow
: Enabled D0000 - D3FFF Shadow
: Enabled D4000 - D7FFF Shadow
: A, C, SCSI D8000 - DBFFF Shadow
: Disabled DC000 - DFFFF Shadow
: Enabled
: On
: Setup
: Disabled
: Non-OS2
ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
4-10
BIOS Configuration
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color