Figure 3. Example Of The Intel - Intel 12Gb/s User Manual

Figure 3. Example of the Intel

5. Configure and install the SAS devices, the SATA devices, or both in the host
computer case.
Refer to the documentation for the devices for any pre-installation configuration
requirements.
6. Connect the RAID controller to the devices.
Use SAS cables to connect SAS devices, SATA devices, or both to the 12Gb/s
Intel
connector information. See
Connectors by Cable to Internal Drives
controller to the drives.
The maximum cable length is 10 meters (393.37 in.). You can connect one device
per SAS PHY unless you use an expander.
12Gb/s Intel® RAID Controllers User Guide
function. Refer to the guide for your motherboard for information about the
PCIe slot.
Press
Here
3_01495-01
Edge of
Motherboard
®
RAID Controller. See
®
RAID Controller RS3DC080 Installation in a
PCIe Slot
Bracket
Screw
SAS Device Cables and Connectors
Connecting a RAID Controller with Internal Port
for information about connecting the
Press
Here
PCIe Slot
for SAS cable and
15