Figure 8. Card Layout For The Intel; Raid Controller Rs3Wc080; Table 4. Jumpers And Connectors On The Intel - Intel 12Gb/s User Manual

The following table describes the jumpers and the connectors on the Intel
Controller RS3WC080.

Table 4. Jumpers and Connectors on the Intel

Jumper/
Connector
EC1
J1A
J1B
J2
J3
J4
J5
J6
22

Figure 8. Card Layout for the Intel

J2 J4 J6
Type
Standard edge card connector
SFF-8643 mini-SAS HD-4i internal
connector
SFF-8643 mini-SAS HD-4i internal
connector
10-pin header
2-pin connector
4-pin connector
16-pin header
2-pin header
®

RAID Controller RS3WC080

J3
EC1
®
PCIe* x8 board edge connector
x4 SAS Port 0 through Port 3
x4 SAS Port 4 through Port 7
Complex programmable logic device (CPLD)
header
Reserved for use.
Modular RAID Key connector
Reserved for use.
On-board Serial Universal Asynchronous
Receiver/Transmitter (UART) connector
Reserved for use.
RISCwatch header
Reserved for use.
Test header
Reserved for use.
J1B J1A
3_02070-00
®
RAID
RAID Controller RS3WC080
Description
12Gb/s Intel® RAID Controllers User Guide
J5