Pci Express Performance; Usability Features; Flexibility Features - Intel 12Gb/s User Manual

•
They permit multiple initiators to address a single target (in a fail-over
configuration) through an expander.

PCI Express Performance

The following list describes the PCIe performance features of the RAID controllers:
•
They provide a PCIe interface that does the following:
— Supports a dedicated PCIe bus.
— Supports x8 lane configuration.
— Supports transfer rates of up to 8GT/s per lane.
— Complies with the PCI Express specification, Revision 3.0, and the Serial ATA
•
They provide unequaled performance through the Fusion-MPT architecture.
•
They provide high throughput and low CPU utilization to offload the host
processor.

Usability Features

The following list describes the usability features of the RAID controllers:
•
They simplify cabling with point-to-point, serial architecture.
•
They support smaller, thinner cables that do not restrict airflow.
•
They provide drive spin-up sequencing control.
•
They provide one LED signal for each PHY to indicate link activity (this is a fault
LED only for controllers with internal port connectors).
•
They provide an I
•
They support the internal SAS Sideband signal SFF-8485 (SGPIO) interface.

Flexibility Features

These features increase the flexibility of the RAID controllers:
•
They support a Flash ROM interface, a nonvolatile static RAM (NVSRAM)
interface, and a pipelined synchronous burst SRAM (PSBRAM) interface.
•
They offer a flexible programming interface to tune I/O performance.
•
They permit mixed connections to SAS targets or SATA III targets.
•
They leverage compatible connectors for SAS connections and SATA III
connections.
•
They permit grouping of up to four PHYs in a single quad port to form a wide port.
•
They permit programming of the World Wide Name.
12Gb/s Intel® RAID Controllers User Guide
specification, version 3.0.
2
C interface for enclosure management.
9