Appendix B The Parameter List - Axis 5400 User Manual

AXIS 5400 User's Manual

Appendix B The Parameter List

The Config File
Note:
--- GENERAL MENU
NODE_ADDR. : 00 40 8C 10 00 86
PS_NAME. : AXIS100086
ROOT_PWD. : pass
USERS. :
BASE_URL. : www.axis.com
AXIS_PRINT_SYSTEM.: YES (YES, NO)
HP_JETADMIN. : NO (YES, NO)
DEF_OUT. : PR1
SYS_LOC. :
SYS_CONT. :
This appendix provides an overview of the AXIS 5400 parameters.
Please refer to the AXIS Network Print Server Technical Reference for
a complete description of the parameters. Alternatively, you can access
the Axis WWW Home Page at http://www.axis.com/, where you can
download the latest technical information.
The left-hand column shows the parameters and their default values as
they appear in the config file and the right-hand column shows the
name of the parameters as they appear in the internal Web pages.
After you have changed them, most parameters take effect for the next
print job. If Requires Restart appears in a parameter description, you
must restart the AXIS 5400, before the new setting for that parameter
takes effect.
Please refer to Section 9 Management & Configuration, on page 97, for
more information about how to change the parameters.
The password parameters, ROOT_PWD and PROS_PWD only
appear when you are logged in to the AXIS 5400 using root. The
password parameters will not be printed when you are printing
the parameter list using the test button.
(PR1, PR2, PR3, PR4,
PR5, PR6, PR7, PR8, LPT1)
Appendix B: The Parameter List
Node Address
Print Server Name (100086 are the last six digits of the serial number)
Root Password
User and Printer Access List
Base URL
Enable compatibility with AXIS Print System
HP JetAdmin Support
Internal Printout Destination
System Location
System Contact
139