Using Telnet - Axis 5400 User Manual

Section 9: Management & Configuration
118

Using Telnet

the Account File
Having assigned an IP address to your AXIS 5400, as described in
Assigning an IP address on page 25, you can manage your AXIS 5400
using the telnet protocol.
The account file contains data concerning the last 20 print jobs. It
Viewing
specifies an internal job number, the user that initiated the job, the
protocol and logical printer that was used, current status (Completed,
Off-line, or Printing), number of bytes printed, elapsed time and off-
line time.
Follow the instructions below to view the account file using telnet:
1. Log in to the AXIS 5400 by typing:
telnet <host name>
window (Windows and OS/2) or in a UNIX shell window.
2. Enter the user id and the password. (The default entries are
and
pass
3. View the account file by typing:
account
The example on the next page shows how to view the account file using
Telnet from a UNIX window.
or
telnet <IP address>
.)
AXIS 5400 User's Manual
in a DOS
root