Section 9 Management & Configuration - Axis 5400 User Manual

AXIS 5400 User's Manual
Section 9 Management & Configuration
Configuration
Overview
The management and configuration tools that are supported by the
AXIS 5400 allows you to:
• Change the print server parameters, i.e. editing the config file
• Receive extended information about the print jobs
• Receive printer port status
• Monitor your printers
• Reset the AXIS 5400
• Upgrade the AXIS 5400 firmware (Refer to Section 11 Upgrading
the Software, on page 133)
The method you should use to manage and configure your AXIS 5400
is depending on the operating system protocols of your network. The
table below displays which method to use for each supported
environment.
Operating System Protocols
IPX/SPX
(NetWare)
TCP/IP
(UNIX,
Windows 95/98/NT/2000,
Windows 3.1/WfW,
NetWare Pure IP, OS/2)
NetBIOS/NetBEUI
(Windows 95/98/NT/2000,
Windows 3.1/WfW, OS/2)
AppleTalk
Section 9: Management & Configuration
Configuration/Management methods
• AXIS NetPilot - See page 107
• HP JetAdmin - See page 123
• Novell Utilities - See page 124
• Web Browser - See page 98
• AXIS ThinWizard - See page 103
• FTP - See page 115
• telnet - See page 118
• SNMP - See page 121
• HP Web JetAdmin - See page 123
• AXIS NetPilot - See page 107
• Web browser - See page 98
• Mac-FTP - See page 115
• AXIS NetPilot via a PC platform in the
same network - See page 107
97