Panorama; Timer; Advanced - Motorola ES400 User Manual

8 - 4 ES400 User Guide

Panorama

Use the Panorama option to enable the camera to take panorama pictures. The Panorama feature allows the user
to stitch multiple pictures together to form one wider picture. The stitching is done on the camera at the time of
capture.
Tap the Panorama option to open the Panorama options window. Select one of the following:
Off - Disable Panorama feature.
Horizontal - Create a panorama picture by moving the ES400 to the right.
Vertical - Create a panorama picture by moving the ES400 down.
When in Panorama mode, the center cross-hairs become wider in proportion with the wider image that will result
from the capture session.

Timer

Use the Timer option to control the delay between the shutter press and the image capture. Options are Off, 5
Sec., 10 Sec., 15Sec. and 20 Sec.

Advanced

Use the Advanced option to set additional camera options.
•
Workflow - Use the Workflow option to customize the camera's behavior when taking pictures.
• Continuous - The user does not view the picture just taken.
• Preview - After the user takes a picture, it is briefly displayed on the screen before returning to camera
mode. During the preview, tap the image to enter the image viewer mode.
• Edit - After the user takes a picture, the user is brought to the image viewer mode to edit the picture.
NOTE In both Preview mode and Edit mode the user can press the Camera button to return to Image Capture
mode.
•
Comment prompt - Turns on reminders that comments have not been added to a particular picture or group
of pictures.
If After each photo is enabled, in the Quick Review and the Image Viewer an Edit icon displays in the Status
bar. Tap the Edit icon to open the Photo Info window.
If When exiting is enabled, a dialogue box appears prompting the user to add comments before exiting.
•
GPS location - GPS coordinates can be used to tag pictures with coordinates for latitude and longitude. The
camera application uses both GPS and WAN triagulation to acquire these coordinates.
If this feature is enabled but the ES400 cannot acquire coordinates from either GPS or WAN triagulation then
the GPS no-signal icon
After Each Photo then a location prompt displays in the Status bar during the quick review stage informing
the user that no coordinate data was attached saved.
The user can enable and disable the GPS coordinates feature by clicking on the GPS coordinates element in
the advanced menu.
• Storage -
Allows the user to either save the pictures to the ES400's built in memory or to a microSD card.
Tap the Storage option to select either Device or SD Card. Note that the same feature exists in the Video
Capture menu. These are intended to be independent settings. So, it is possible that a user could have
pictures saved to the ES400's memory and videos stored on the microSD card.
displays in the Status bar. Also, if the user has not enabled Comment Prompts >