Installing The Tether - Motorola ES400 User Manual

1 - 10 ES400 User Guide
Slide the SIM card holder up to unlock.
6.
Lift the SIM card holder.
7.
Remove the SIM card from holder.
8.
Close the SIM card holder.
9.
Slide the SIM card holder to the down to lock into place.
10.
Slide the battery lock latch down to lock the battery in place.
11.
Replace the battery cover.
12.

Installing the Tether

The ES400 comes with an optional tether to secure the stylus to the ES400.
Remove the stylus from the back of the device.
1.
Feed one loop of the tether through the stylus (1), and pass the other loop through the first (2).
2.
With the stylus secured to the tether, feed the free loop through the tether anchor and pass the stylus through
3.
the loop (3) to secure it.
Install Tether onto Stylus and ES400
Figure 1-11