Powering On The Es400 For The First Time - Motorola ES400 User Manual

1 - 6 ES400 User Guide
Inserting the Battery
Figure 1-8
Align the battery cover with device.
5.
Replacing the Battery Cover
Figure 1-9
Slide the battery cover up to lock into place.
6.

Powering On the ES400 for the First Time

Press the Power button to turn on the ES400. The splash screen displays as the ES400 boots then the calibration
window appears.
NOTE The Calibration screen can be accessed by tapping Start > Settings > System > Screen > Align Screen
button.
Remove the stylus from the back of the ES400.
1.
Tap the screen to begin calibration.
2.
Carefully press and briefly hold the tip of stylus on the center of each target that appears on the screen.
3.
Battery Lock Latch