Password Locking Setup - Motorola ES400 User Manual

To lock the ES400, tap Start >
Lock Screen
Figure 11-5
Drag to either the right or left side of the screen.
If a password is set up, enter the password and then tap
to unlock and display the Contacts window, tap

Password Locking Setup

Use the Password window to set a password to disable unauthorized access to the ES400.
If the device is configured to connect to a network, use a strong (difficult to figure out) password to
NOTE
help protect network security. Password cracking tools continue to improve and the computers
used to crack passwords are more powerful than ever.
Tap Start > Settings > Lock > Password.
1.
Select Prompt if device unused for check box to enable password protection.
2.
From the drop-down list, select a time value for the protection to take affect after non-use.
3.
From the Password type: drop-down list, select either Simple PIN or Strong alphanumeric.
4.
For a simple password, enter a four-digit password in the Password field.
5.
For a stronger password:
Enter a seven character password in the Password: field. A strong password must contain at least seven
a.
characters and contain at least three of the following: uppercase and lowercase letters, numerals, and
punctuation.
Re-enter the password in the Confirm: field.
b.
Tap OK.
6.
. The lock screen appears.
to unlock and display the Messaging window.
to unlock and display the Home screen, tap
Settings 11 - 7