Backlite/Display - Trane TZEMT400BB32MMA User Manual

Backlite/Display

The Backlite/Display screen is used to set the backlight time-out and contrast.
Backlite Timeout is the time (in seconds) from the last button press to the backlight going out. The time-out can
be set between zero (0) and one hundred and twenty (120) seconds. Thirty (30) is the default setting. When set
to zero (0), the backlight will remain always on.
Contrast sets the contrast level of the LCD display. The contrast can be set between zero (0) and twenty (20).
Ten (10) is the default setting. If the display is too light, using a higher number. If dark lines appear in the dis-
play, use a lower number.
Adjust the Backlight
1. Press the MENU button.
User Settings
2. Scroll to
Backlite/Display
3. Scroll to
4. Scroll to Backlite
5. Press the plus (+) or minus (-) buttons to change the number of seconds.
Î The backlight time-out can be set between 0 and 120 seconds. Thirty (30) is the default setting. When set to Zero
(0), the backlight will remain always on.
Adjust the Contrast
1. Press the MENU button.
User Settings
2. Scroll to
Backlite/Display
3. Scroll to
4. Scroll to Contrast.
5. Press the plus (+) or minus (-) buttons to change the contrast value.
Î The contrast can be set between 0 and 20. Ten (10) is the default setting.
Select
and press the button.
Select
and press the
Timeout.
Select
and press the button.
Select
and press the
Backlite/Display
Backlite Timeout 60
Contrast 10
Done + -
button.
button.
13